Six specifications for stamping parts processing

1. Strict inspection system has been established in the production process, and the first stamping parts must be fully inspected before they pass the inspection

Put into production, and at the same time strengthen the inspection, when the accident should be dealt with in time.

2. Adhere to the civilized production system, such as the transfer of workpieces and blank parts must use appropriate work station equipment, or it will crush and hurt

Abrasion workpiece surface affects the workpiece surface quality.

3. During the stamping process, the mold cavity should be kept clean, and the work pieces should be placed after orderly processing in the workplace

Put in order.

4. The raw material must conform to the specified technical conditions (strictly check the specification and brand of the raw material, if there are conditions

In the case of high dimensional accuracy and surface quality requirements for the workpiece testing.

5. All the links specified in the process regulations should be fully and strictly followed.

6. The stamping equipment used shall ensure normal operation.